how to install oil catch can on 07 toyota tacoma

HOW TO INSTALL OIL CATCH CAN ON 07 TOYOTA TACOMA UPGRADE

Charging the A/C system - covered in Charging the A/C System on a 1st Gen Tacoma.Removing and replacing the A/C compressor.Removing the Air Box and Power Steering Pump to gain access to the A/C compressor.Replacing the Receiver/Drier - covered in Replacing the A/C Receiver/Drier on a 1st gen Tacoma.With all the parts in hand, let's get started - it's straight forward and has 5 major sections. A/C Can Tap for R134A Refrigerant - connects the cans of refrigerant to the manifold gauge.2, 12oz cans of 134a A/C refrigerant - this is the stuff that makes it chilly.Standalone A/C Vacuum Pump - if you don't have a large compressor, this pump will work great by itself.Pneumatic A/C Vacuum Pump - you can use this pump and save a few bucks if you have a big compressor around that can generate 4.2 CFM 90 PSI.A/C Vacuum Pump - working in tandem with the manifold, the vacuum pump removes all air (and more importantly moisture) from the A/C system prior to charging.A/C Diagnostic Manifold Gauge Set - this gauge set would allow me to test the system and to charge the system with 134a refrigerant once I knew it would hold pressure.It's easy - and cheaper than the $150 or so to have a shop do it - so I recommend picking these up if you don't have them already:

Note: You only need the following tools if you're going to charge the A/C system yourself. Two adjustable wrenches - 8-inch and 10-inch.A few sockets (this is a good set) - 10mm, 12mm, 14mm, 17mm.You'll need the following tools and supplies regardless of whether you're charging the system yourself: 10ml (10cc) syringe - used to measure the right amount of PAG46 oil into the system.

Note that ND8 shown in some of my photos is equivalent to PAG46. A/C PAG46 Oil - 8oz - this oil is used to lubricate various parts of the system.Santech MT2580 A/C System O-Ring and Gasket Kit - I figured that I might as well replace any o-rings that I came across during this process, and this Santech kit is made specifically for our Tacomas.Any o-rings you run into should be replaced, and it's good practice to replace your Receiver/Drier any time you replace a major component of your A/C system. You should also pick up a few other things at the same time. DEX/MERC ATF - 1qt - you'll need a bit of DEX automatic transmission fluid to refill the power steering pump after removing it, since some of the fluid in the reservoir will drain out.Plus, it comes with a new clutch! Save a few hundred dollars and be just as happy! This is the part I recommend. Denso A/C Compressor w/Clutch (471-1223) - Denso makes the Toyota OEM A/C compressor as well, so this one is identical except for the box.Toyota OEM A/C Compressor Clutch (88410-35340).The OEM compressor does not come with a clutch, so you'll need to re-use your old one or buy a new one Toyota OEM - you can go Toyota-OEM-sourced here, but you'll pay for it.You have a couple good options in this space - OEM or Denso: Replacing the A/C compressor means you'll - obviously - need a new compressor. 96-04 Tacoma Bed Rack open dropdown menuĬharging the A/C System on a 1st Gen Tacoma (or 3rd Gen 4Runner) Gathering Parts.5th Gen 4Runner Storage Platform (2010+).

HOW TO INSTALL OIL CATCH CAN ON 07 TOYOTA TACOMA UPGRADE

4Runner Stainless Brake Lines for Tundra Brake Upgrade.

Tacoma-to-Tundra Hard Brake Line Upgrade Kit.

What I Take With Me On Trips (2021 edition).

The Family 4Runner (archive) open dropdown menu.

How I Got Started with Offroad Adventuring.

How-to: Servicing (Cleaning and Rebuilding) the Hi-Lift.

Steering Rack Bushing Replacement on a 1st Gen Tacoma (or 3rd Gen 4Runner).

Replacing the Steering Rack on a 1st Gen Tacoma (or 3rd Gen 4Runner).

Lower Control Arm Bushing Replacement on a 1st Gen Tacoma (or 3rd Gen 4Runner).

Rebuilding/Revalving Smooth Body Shocks.

Install of SPC Upper Control Arms on a Toyota Tacoma.

Replacing Lower Ball Joints (LBJ) on a 1st Gen Tacoma (or 3rd Gen 4Runner).

Sound Deadening a 1st Gen Tacoma - Mat & Foam Installation.

Sound Deadening a 1st Gen Tacoma - Materials and Prep.

Replacing the Transfer Case on a Tacoma.

Replace the Fuel Filter in a 96-04 Tacoma or 96-02 4Runner.

Replacing Rear Axle Seal & Bearing w/ABS (1st gen Tacoma or 3rd gen 4Runner).

Toyota Tacoma Timing Belt Replacement for 3.4L V6 5VZFE (also 4runner, Tundra, and T100).

Tacoma Rear Drum Brake Shoe Replacement (also 4Runner).

Which Wheels Fit the Tundra Brake Upgrade?.

Tundra Brake Upgrade on a Tacoma (or 4Runner).

Charging the A/C System on a 1st Gen Tacoma (or 3rd Gen 4Runner).

Replacing the A/C Evaporator Core on a 1st gen Tacoma.

Replacing the A/C Compressor on a 5VZFE (Tacoma, Tundra, 4Runner).

Replacing the A/C Receiver/Drier on a 1st gen Tacoma.

Do you have a GPX/KML/Coordinates for that?.

Index of Places and Adventures open dropdown menu.

How to install oil catch can on 07 toyota tacoma